esada_instructions:virtual_machine_instructions

This is an old revision of the document!

HOW TO CONNECT TO THE VIRTUAL SCORING MACHINE

Each ESADA center will get their own virtual machine to manually score the sleep studies. These instructions include steps to connect to the virtual machine and how to find the sleep studies and start scoring.

CONNECTING TO THE VIRTUAL MACHINE

1. Start by connecting to the vpn using OpenConnect (instructions here).

2. Navigate to start menu and search for Remote Desktop Connection and open the application.

3. Insert the correct IP address(130.208.209.28) into the designated field in the Remote Desktop Connection see Figure 1.

Figure 1
Figure 1: Insert the IP address in the “Computer:“ field.

4. After clicking connect you will be asked for credentials as seen in Figure 2. Usually there will be a default domain to connect to, please select the “More choices” option and then “Use a different account”.

Figure 2
Figure 2: First choose “More choices” and then choose “Use a differnt account”.

5. Then type in the Username field SLEEP\username and use the same password as for the VPN connection.

6. The first time you connect to the virtual machine you have to allow the connection and the following window will pop-up. Please select “Don't ask me again for connections to this computer” and then click in “Yes”. See Figure 3.

Figure 3
Figure 3: The window that pops up the first time you connect to the computer. Please select “Don't ask me again for connections to this computer” and then “Yes” marked in green.

7. After that the virtual computer should open automatically. You can differentiate between the local computer and the virtual machine by the blue top banner on the virtual machine. See Figure 4. 8. To access your recording for the first time:

  1. Open Noxturnal
  2. Choose “Add” (in bottom left corner in Noxturnal)
  3. From drop down list, choose Add Location
  4. A window opens, choose Network, choose SynoSleepData
  5. Choose the EsadaWorkspace folder
  6. Find your ESR number and select and click on Select folder (you can only choose your center).
  7. Now you have the correct studies in your library in Noxturnal
Figure 4
Figure 4: The blue banner in the top helps you distinguish between the local computer and the virtual computer.

8. Now you can open Noxturnal and score your studies (Scoring of Self-Applied Somnography (SAS) studies in Noxturnal 6.3) and save a report (Reports in Noxturnal) in a folder in the same location as where your recordings are in your virtual machine. You need to create this folder the first time you save a report. Please note that your three night study is now three separate studies, one for each night and therefore in three separate reports. 9. When you want to quit the session on the virtual computer - just click on the “x” on the blue banner and confirm that you want to end the connection to the computer. Figure 5 shows the window where you confirm that you want to end the session.

Figure 5
Figure 5: After clicking on “x” on the blue banner this window pops up. Select “Yes” if you want to sever the connection and quit the session on the virtual machine.
  • esada_instructions/virtual_machine_instructions.1698917342.txt.gz
  • Last modified: 2023/11/02 09:29
  • by kristinao