====== REDCAP INSTRUCTIONS ====== ===== LOG IN ===== Please go to our REDCap webpage (https://redcap.ru.is) and log in with the credentials you have received.
{{:esada_instructions:log_in.png?800|Figure 1}} The log in page of redcap.ru.is.
When logged in you are presented with the homepage. Please navigate to **My Projects** marked with **green**.
{{:esada_instructions:home.png?800|Figure 2}} The REDCap homepage.
In **My Projects** you will see all of the projects that are to be used. The projects contain one questionnaire or a collage of questionnaires. The questionnaires in each project should be in two languages – English and the native language at each ESADA center. The questionnaires are setup so that in the beginning the participant can choose the language of the questionnaires. The participant will receive the questions in a language depending on the language they choose. For each ESADA center there will be **two** projects - they include the same questionnaires (**ISI, FSS, ESS and PSQI**) along with the **Patient Global Impression scales** (**PGI**). The difference between the two projects is the that one project is for use at baseline and the other for use at follow-up. The baseline project includes the **PGI Severity scale** and the follow-up includes the **PGI Improvement scale**. Please start by selecting the appropriate project from the list in **My Projects**. ===== SENDING OUT QUESTIONNAIRES ===== All of the questionnaires will be sent via private link to the participant. On the left panel under **Data Collection** there is a tool called **Survey Distribution Tools**. The following image shows the **Survey Distribution Tools** page. Under that you will find the public link to the questionnaire. However, when sending questionnaires not used for recruitment, it is preferable for the responses not to include personally identifiable information. Therefore, each participant receives the questionnaires on a private link only connected to their research ID. To do that the participants need to be added to the **Participant List**, where their e-mails are linked with the research ID. NOTE: the public survey link is useful to test if the questionnaire is working properly.
{{:esada_instructions:data_dist_tools.png?800|Figure 3}} The **Survey Distribution Tools** are located in the menu on the left under **Data Collection**.
==== ADDING PARTICIPANTS TO THE PARTICIPANT LIST ==== To add participants to the participant list please navigate to the **Survey Distribution Tools** in the menu on the left. On the **Survey Distribution Tools** page, please choose **Participant list**. Figure 4 shows the **Participant List** page.
{{:esada_instructions:participant_list.png?800|Figure 4}} The **Data Distribution Tools** are located in the menu on the left.
Before adding participants, the **Participant Identifier** (research ID) option needs to be enabled. Thereafter, you click on the **Add Participants** and the following page appears.
{{:esada_instructions:add_part2.png?500|Figure 5}} The window where one or more participants can be added to the participant list. It is important to link the correct e-mail address to the correct research ID.
Participants are added to the list as seen on the figure above. First the e-mail of the participant is entered followed by a **comma** and then the research ID (**ESR number**). Multiple participants can be added to the list simultaneously by inputting the e-mail and research ID of multiple participants, take care to only input **one participant per line**. ==== SENDING SURVEY LINKS ==== The private links can then be sent to the whole participant list at once by clicking **Compose Survey Invitations** on the **Participant list** page.
{{:esada_instructions:participant_list_send.png?800|Figure 6}} To send out the private survey links you go to **Compose Survey Invitations**.
You can send invitations to answer the questionnaire to the whole group or a subset of the group by checking the boxes by the participants on the right on the **Compose Survey Invitations** page.
{{:esada_instructions:compose.png?800|Figure 7}} This window is where the invitations are composed and scheduled. The invitations can be sent out in bulk to the whole participant list at the same time.
The invitations can be sent immediately or at a specified time. Further, reminders can be sent up to 5 times after the initial invitation is sent (take care to not overload the participant's inbox and keep the reminders limited). NOTE: remember to select the correct e-mail address you want to send the invitations out from - it should be the sleeprevolution e-mail provided by us. ===== RESPONSE MONITORING ===== On the left panel under **Data Collection** is the **Record Status Dashboard**. There the questionnaire responses from participants can be monitored. The **Survey Invitation Log** under **Survey Distribution Tools** is also another tool to monitor invitation responses, for example if there are scheduled invitations and reminders. The following figure shows the **Record Status Dashboard** and how the incomplete answers can be monitored and followed up if needed.
{{:esada_instructions:record_status.png?800|Figure 8}} The **Record Status Dashboard** shows the questionnaire responses from participants. The orange marks a record where the participant did not finish the questionniare.
To follow-up with the participant and ask them to finish answering - note down the **Record ID** and where the participant stopped answering and go back to the **Participant List**. From there you can choose the questionnaire that is missing from the drop-down list at the top (see Figure 9) and send a link to the participant by using **Compose Survey Invitations**.
{{:esada_instructions:choose_missing.png?800|Figure 9}} Marked in **green** is where the drop-down list is located to choose the list that is missing.
===== ADD/EDIT A RECORD - FOR eCRF PROJECT ===== To ensure that the protocol is followed in all ESADA centers across Europe, the ESADA Study Protocol project has been made in REDCap for each center. The project includes all steps and phases of the ESADA study protocol. It is designed as a checklist and also a way for you to record the body and vital signs measurements. Furhter, you can keep record of the diganoses and treatments the participant receives. ==== ADDING A NEW RECORD ==== When a participant is starting the study, the Study Protocol project is opened in REDCap and the participant is added to the **Participant List**, as is explained above. Make sure that the **Participant Identifier** option is **Enabled**, see Figure 4. When the participant has been successfully added to the list, then next step is to create a record for the participant. Click on the link icon in the **Link** column in the participant list to open the first form in the eCRF. See Figure 10.
{{:esada_instructions:crf1.png?800|Figure 10}} Marked in **green** is the link icon.
To successfully create a record for the participant, the first form of the eCRF needs to be **submitted**. After submitting the first form, the next form is dispayed. However, it is now safe to close the form because the record has been created and can be edited at will and as many times as needed. Figure 11 shows the **Participant List** after the record has been created. The **record ID** is shown in the **Record** column and by clikcin on the **record ID number** the record opens and can be edited. **NOTE:** If the record ID number has not appeard after exiting the form, try refreshing the webpage.
{{:esada_instructions:crf2.png?800|Figure 11}} Marked in **green** is the record ID number after the record has been created. By clicking on it, the record opens up again and can be edited.
Figure 12 shows the record when it is opened up again. From there all of the forms contained within the eCRF can be opened up and edited at will. By clicking on a form in the left panel it opens and can be edited. When a form has been filled out it is important to remember to **Save and exit** the form.
{{:esada_instructions:crf3.png?800|Figure 12}} All of the forms contained within the eCRF can be seen in the left panel. The circle beside the forms shows the status of the answering of the form. A previously saved form can be edited by selecting **Edit response** after opening it.
Figure 13 shows the another instrument form in the eCRF. The status icon shows the status of the response of the from, if it has been filled out completely or if something is missing.
{{:esada_instructions:crf4.png?800|Figure 13}} This form has not been filled out yet. When this form has been completely filled out it can be marked as **Complete**. It is importand to **remember** to click **Save and Exit** after filling it out.
==== EDITING AN EXISTING RECORD ==== In the study protocol the participant will arrive for multiple visits. Therefore, the record for the participant needs to be opened again and edited numerous times as the participant progresses in the study. To find an existing record for a participant, go to the **Participant List** under **Survey Distribution Tools**. There a list of all of the participants in the study is displayed. By clicking on the **record ID number** in the **Record** column of the **Participant List** you can open the record and start editing it again. The filled out forms can be edited by selecting **Edit response** above the record (see Figure 12). Further, the other forms in the record that have yet to be filled out can be seen in the menu panel as seen in Figure 12. ===== DATA EXPORT ===== The data can be exported as a .csv file in **Data Export, Reports and Stats** under **Applications** in the panel on the left. The following image shows the data export page and where to initiate the export.
{{:esada_instructions:export.png?800|Figure 10}} Click on **Export Data** to initiate the export.
After initiating the data export, a window appears as seen below, where the data format and other options are selected.
{{:esada_instructions:data_type.png?800|Figure 11}} Choose the export format of the data.