Differences

This shows you the differences between two versions of the page.

--- esada_instructions:virtual_machine_instructions_general [2024/04/23 11:36] – benedikt
+++ esada_instructions:virtual_machine_instructions_general [2024/04/24 14:35] (current) – removed benedikt
@@ Line 1: / Line 1: @@
-====== HOW TO CONNECT TO THE VIRTUAL SCORING MACHINE ======
-Each ESADA center will get their own virtual machine to manually score the sleep studies. These instructions include steps to connect to the virtual machine and how to find the sleep studies and start scoring.
-===== CONNECTING TO THE VIRTUAL MACHINE =====
-**1.** Start by connecting to the vpn using OpenConnect (instructions [[esada_instructions:cisco_any_connect|here]]).
-**2.** Navigate to start menu and search for **Remote Desktop Connection** and open the application.
-**3.** Insert the correct IP address(130.208.209.28) into the designated field in the **Remote Desktop Connection** see Figure 1.
-<figure> {{: esada_instructions:rd.png?500 |Figure 1}} <caption> Insert the IP address in the **"Computer:"** field. </caption></figure>
-**4.** After clicking connect you will be asked for credentials as seen in Figure 2. Usually there will be a default domain to connect to, please select the **"More choices"** option and then **"Use a different account"**.
-<figure> {{: esada_instructions:cred.png?500 |Figure 2}} <caption> First choose **"More choices"** and then choose **"Use a differnt account"**. </caption></figure>
-**5.** Then type in the **Username** field **SLEEP\username** and use the same password as for the **VPN** connection.
-**6.** The first time you connect to the virtual machine you have to allow the connection and the following window will pop-up. Please select **"Don't ask me again for connections to this computer"** and then click in **"Yes"**. See Figure 3.
-<figure> {{: esada_instructions:allow.png?500 |Figure 3}} <caption> The window that pops up the first time you connect to the computer. Please select "Don't ask me again for connections to this computer" and then "Yes" marked in green. </caption></figure>
-**7.** After that the virtual computer should open automatically. You can differentiate between the local computer and the virtual machine by the **blue** top banner on the virtual machine. See Figure 4.
-<figure> {{: esada_instructions:virtual.png?500 |Figure 4}} <caption> The blue banner in the top helps you distinguish between the local computer and the virtual computer. </caption></figure>
-**8.** **How to map a network drive (for first time access only)**
-Click on the File Explorer icon, see fig. 5.
-<figure>{{:esada_instructions:file_explorere_icon_.png?400|}} <caption>  </caption> </figure>
-and there you will find “Network”. Right click on “Network” and choose “map network drive”, see fig 6.
-<figure>{{:esada_instructions:map_network_drive.png?400|}} <caption>  </caption> </figure>
-You will then get the window shown in fig 7. You can use the letter suggested in “Drive” (no need to change there) but in the “Folder” you need to write \\SynoSleepData\ESADAworkspace like is shown in the figure. Then click “Finish” and the network is mapped
-<figure>{{:esada_instructions:network_folder_.png?400|}} <caption>  </caption> </figure>