Differences

This shows you the differences between two versions of the page.

--- esada_instructions:nox_devices_and_noxturnal_instructions [2023/07/11 14:05] – katrinhera
+++ esada_instructions:nox_devices_and_noxturnal_instructions [2023/11/27 12:12] (current) – benedikt
@@ Line 1: / Line 1: @@
-{{:esada_instructions:funding_logos.jpg?400|}}                                              {{ :esada_instructions:sr_logo_oneline_2_.png?400|}}
+{{:esada_instructions:funding_logos.jpg?400|}}
 ====== Training: Use of Nox Medical Devices and Noxturnal Software ======
@@ Line 168: / Line 168: @@
 | **g. 1x Nasal Cannula ** \\ The cannula is used to measure air flow pressure through the nose. \\ It fits into the pressure connector on the Nox A1s. | {{:esada_instructions:cannula.png?100 |Nasal cannula}} |
 | **o. 3x single use wristband ** | {{:esada_instructions:wristband.png?100 |Single use wristband}} |
-| **p. Batteries 2x single use AA (Energizer ultimate lithium) and 2x rechargeable AAA (eneloop pro) ** | {{:esada_instructions:batteries.png?100 |Batteries}} |
+| **p. Batteries 1x single use AA (Energizer ultimate lithium) and 2x rechargeable AAA (eneloop pro) ** | {{:esada_instructions:batteries.png?100 |Batteries}} |
 ==== 3.4. Preparing the cardboard backing sheet ====
@@ Line 200: / Line 200: @@
        * 1x Neck band fixed to the Nox A1s recorder with the 2 clamps on the recorder
 </WRAP> |
-| {{:esada_instructions:bag4.png?200 |Step 4}} | Roll up the chest RIP belt. \\ Place the rolled-up chest RIP belt in the pocket labelled with the Red triangle. |
+| {{:esada_instructions:bag4.png?200 |Step 4}} | Place a pulse oximeter in the bag. \\ The oximeter should be correctly configured to run with the Nox A1s recorder.\\ The oximeter should be clean and contain 2x fully charged eneloop pro AAA batteries.|
-| {{:esada_instructions:bag5.png?200 |Step 5}} | Make a small hole on the bag with the nasal cannula. \\ Pull the connector piece of the nasal cannula through the hole of the bag and connect it to the Nox A1s recorder. |
+| {{:esada_instructions:bag5.png?200 |Step 5}} | Place the 1x red body cable and 1x blue body cable in the bag. \\ The body cables should be clean. |
-| {{:esada_instructions:bag6.png?200 |Step 6}} | Place the cannula bag in the pocket labelled with the Blue square. |
+| {{:esada_instructions:bag6.png?200 |Step 6}} | Place the laminated instructions: picture and the QR code information paper regarding the setup in the bag. |
-| {{:esada_instructions:bag7.png?200 |Step 7}} | Fix the neck band to the 2 clamps on top of the Nox A1s recorder. \\ Now the preparation of the SAS setup on the cardboard backing sheet is finished. |
+| {{:esada_instructions:bag7.png?200 |Step 7}} | Place three Nox SAS Electrode bag, marked individually night1, night2 and night3 containing all the electrodes and adhesive strips.|
-| {{:esada_instructions:tape.png?200 |Step 8}} | Place one bandaid roll in. This is for use to secure electrodes and \\ nasal cannula on the face and for those that have sensitive skin overall.\\ This should be used instead of the tape in the Nox SAS electrode Bag. |
+| {{:esada_instructions:tape.jpg|Step 8}} | Place one bandaid roll in. This is for use to secure electrodes and \\ nasal cannula on the face and for those that have sensitive skin overall.\\ This should be used instead of the tape in the Nox SAS electrode Bag. |
 | {{:esada_instructions:wristband.png?200 |Step 9}} | Place 3 x wristbands in. |
 | {{:esada_instructions:alcohol.png?200 |Step 10}} | Place 2x Alcohol pads to clean skin, only to be used for the first night. |